I'm 6'4", so nothing is going to make my butt look bouncy. The stock shock on my XR1200 is doing its best. With no adjustments for damping and softly sprung, even for my slim 185 lbs, I feel like the bike's out of control when the curves get a little bumpy. Mostly I've been commuting on it, which the stock setup does just great. When I get out on the curvy backroads, or try to chase down my friend John, the pegs are dragging before I come anywhere close to the tires' edges.
As I explore the options out there, I find a couple solutions:
- A 2" riser block that raises the back of the bike provides more ground clearance, but doesn't cure the shock's limitations.
- Several options for aftermarket rear shocks that are still the stock length and have much better damping and springs matched to rider weight.
Or, I can go with the best - Ohlins - the acknowledged choice of racers and OEM equipment on top sport bikes like Ducati's S models.
The consensus of most riders on the XR1200 forum is that the Ohlins are a preferred choice, though pricey. The Ohlins come in lots of configurations, but good information about them for the XR1200 prove hard to find. Best source is the XR1200 forum thread on Ohlins. A quick check of the OhlinsUSA website lists an option for the XR1200, but it's the stock length with only a minor length adjustment (HD 907: HD XR 1200 2009 S36PL: $875.00 a pair).
Since the XR1200 was introduced in Europe first, I find lots of suppliers over the pond. (Harley Davidson wasn't sure American buyers would go for this sport-oriented model even though it was designed along the lines of HD's winning U.S. flat-tracker racer). Adrenalin-Moto, the self-proclaimed leading purveyor of all things XR1200 related, has lots of rear suspension options along with other goodies that make my head spi and my credit card smoulder. With the dollar doing so poorly, however, this is an expensive way to get the shocks.
I'm looking for a U.S. distributor, so I email a general information email at OhlinsUSA. I get a quick response from Jerry Wohlgemuth: "many shocks available, from very basic to highly adjustable. All we need is an eye to eye length & shock 'type' & we can put something together for you. Shock prices range from $550.00 up to $1450.00 a pair." He provides a contact name and phone number for a distributor that can help me put together the package I want.
After a long conversation with Jim at Pro Pilot Racing about what I'm looking for, he rings off to do some more research on options. We settle on the HD852 (36TRCL) which is the Ohlins shock used in the Trophy racing series in Italy. At 415mm long, this shock is about 2" longer than the stock shock (360mm). It has compression and rebound damping adjustments and and a length adjustment of +/- 5mm. The shock is shipped from Ohlins in Sweden and arrives about 6 weeks later.
I'm anxious to mount them up, but we're deep in a cold snap. I have to wait a couple days for the temperatures to get back above freezing. Taking the old shocks off is easy. Putting the new ones on turns out to not be quite as easy. Because of the longer length and the geometry in the back, the new shocks interfere with the mid-mount for the exhaust system. After removing the exhaust, it takes about twenty minutes with the metal file to shave 1/4" off the bracket. That gives the shock enough clearance so that the springs don't rub on the mount.
Tighten everything up and it's ready to ride. The yellow springs and gold damping resevoir look trick.
One worry was whether the longer shock would work with the stock kickstand. I'd seen several posting that it wouldn't, but in my enthusiasm I had ignored this warning. Turns out everything works fine. The bike leans over a bit further on the side stand, but seems even more stable after the modification.
Sitting on the bike, the difference is immediately noticeable. I've got a 36" inseam and I'm on the balls of my feet. Feels like a dirt bike. Immediate impressions, bouncing up and down while seated, is of firm springs. A short ride doesn't reveal much of their performance but confirms no rubbing and everything working properly. I've done several rides since and the shocks are firm but not harsh. They seem to soak up bumps better than the stock shock and I love the taller feel. Since the roads are still icy and cold, I haven't yet tested the full performance yet.
No comments:
Post a Comment